Introducing CorbinLink™ Wireless
No wires through the cab. An encrypted receiver at each rear light. Our easiest install yet.
Our easiest install yet.
CorbinLink™ Wireless puts a receiver at each rear light. No fishing wire through the cab, no splicing the rear lights together. Plug in the front, mount the receivers, done.
- No wires through the cab The front end wires in like our classic kit. The rear links wirelessly, so the hardest part of the install is gone.
- A receiver at each rear light Unplug the factory light, plug the receiver in, done. Nothing to wire together at the back. The shortest install path, period.
- 3 Devices, 1 Encrypted Link The controller and both receivers are encrypted to one another. No interference from outside sources, no crosstalk from other machines, no lost signal.
- 40 Sec. Auto-Cancel with Smart Signal Hold Cancels turn signals after 40 seconds. Holding the brake pauses the countdown, so your signal never times out at a stop light.
The difference is the install.
- ✓ Front end wires in like our classic kit
- ✓ Identical light styles and on-vehicle look
- ✓ Works with dash light wiring and horn add-ons
CorbinLink™ Wireless is the shortest install path we make. Each light gets its own receiver. Prefer everything hardwired end to end? Go Wired.
Available for these machines
Pick your machine. If it is covered, you are one click from wireless.
CorbinLink™ Wireless FAQs
How does CorbinLink™ Wireless work?
A controller mounts behind the dash and wires into the switch and front signals like our classic kit. At the back, an encrypted receiver plugs into each rear light. The controller sends the signal wirelessly across the cab, so there is no harness to run to the rear taillights.
Do I have to wire anything at the back?
No. Unplug the factory light, plug the receiver in, done. Both rear lights get their own receiver, so there is nothing to splice and nothing to run between them.
Can other machines or accessories interfere with the signal?
No. The controller and both receivers are encrypted to one another. No interference from outside sources, no crosstalk from other machines, no lost signal.
Do horn kits and dash light wiring still work with CorbinLink™ Wireless?
Yes. The front of the machine wires in exactly like our classic kit, so front-end add-ons install and work the same way.
What is Smart Signal Hold?
The next generation of our 40-second auto-cancel, included with CorbinLink™ Wireless. The countdown pauses whenever you hold the brake. Say your signal has been on for 10 seconds when you pull up to a light. Hold the brake and it stays on as long as you sit there. When the light goes green and you roll, the countdown resumes right where it left off.
